Functions and features:
● 35mm standard DIN rail installation, complying with standard DIN
EN50022.
● Ten pole width (Modulus 12.5mm), complying with standard
JB/T7121-1993.
● Standard configuration 5+1 digits display (99999.9kWh) by step
motor impulse register.
● Standard configuration type S wiring (Type U)) for direct connect
operation, we can also choose another type of wiring, and use 5+1
digits display by impulse register, (Type U CT ).
● Standard configuration short terminals cover, may select
extension terminals cover, in order to protect to use safety.
| Technical parameters |
| Model | Accuracy | Reference Voltage(V) | Current specifications(A) | Starting current(A) | Insulation performance |
| XTM1250S-U | Class 1.0 | 3×230/400V 3×240/415V | 5(30),10(60) 5(100),20(100) | 0.02,0.04,0.08 | AC voltage 4kv for 1 minute,1.2/50us waveform impulse voltage 6kv |
| If you need different reference voltage or current specification,
please advisory our sales personnel. |
Outer and mount dimension:
Terminal Note:
1/2 Ia IN/OUT
3/4 Ib IN/OUT
5/6 Ic IN/OUT
7 Neutral wire
8/ 9 Test pulse output contact
Direct(Drawing 1)
Terminal Note:
1/2 Ia IN/OUT
3/4 Ib IN/OUT
5/6 Ic IN/OUT
18/16/14/12 Phase A/B/C/N
7 N
8/9 Test pulse output contact Connect by CT( Drawing 2)
Further information:
1. Plastics materials: all raw materials are brand-new and
second-hand materials are forbidden. Furthermore some of them are
supplied by super branding companies like DSM, Mitsubishi.
2. There is just one level of quality as A in MEIHENG and we are
aim to provide the excellent articles to our clients and help them
gain more market shares.
3. ODM: we are providing ODM services to the super companies (more
than 15) who are top-10 electrical industrial companies in their
country. Just show us your ideas and we will present a solution.
FAQ
A. How's the delivery time?
Depend on your quantity, usually within 20days after receiving
deposit
B. Would you accept OEM/ODM service?
Glad to say that there is planning department, technical department
and mould tooling center in
our factory. For the OEM & ODM, it is ok for us if your brand,
market shares are great.
